UK Based2–5 Year WarrantyShips Across UK & EUFree Shipping

Cable Reel Covers — How to Protect Your Reels from Weather and Site Damage

a man cover cable reel with custom made cover

Share This Post

Cable reels and drums are expensive pieces of industrial equipment. Cable reel covers are a straightforward solution. Whether you are storing fibre optic cable, electrical power cable, armoured cable, or telecommunications line, the reel itself — and more importantly, the cable wound on it — represents a significant value. Leaving that equipment exposed on a site, in a yard, or in outdoor storage is a decision that tends to show up eventually in damaged cable ends, corroded drum hardware, and cable that has absorbed enough moisture to cause problems in use.


This guide covers what they protect against, what material works in a UK industrial environment, and how to get covers made to fit your specific drum sizes.

What Happens to Unprotected Cable Reels


Moisture Damage to the Cable


The cable wound on a reel is typically sealed at the ends, but those seals are not infallible. Prolonged exposure to rain, standing water, and damp air allows moisture to work into cable ends, splices, and any point where the cable jacket has been nicked or abraded. For electrical cable, this causes insulation resistance to drop. For fibre optic cable, moisture ingress at a connector or splice point can cause signal loss. For armoured cable, the steel armouring corrodes from the outside in if the outer sheath is compromised.

Drum Deterioration


Wooden cable drums — still common in the UK for many cable types — absorb moisture and begin to rot at the flanges and core if left wet for extended periods. The drum becomes structurally weaker, and in the worst cases the core or flange fails under the weight of the cable. Metal drums corrode at bolted connections and flange edges. Both types deteriorate faster in a UK outdoor environment without protection.

UV Degradation


UV exposure degrades the outer sheath of most cable types over time, particularly PVC-jacketed cables. A cable left on a drum in direct sun for months loses flexibility in the outer sheath and becomes more prone to cracking when unrolled. UV also fades drum markings and labelling, which causes identification problems on a busy site or in a cable yard.

Site Contamination


On construction sites, cable drums are exposed to concrete dust, cutting debris, chemical spills, and mud. Contamination of cable ends and reel hardware causes problems both in storage and when the cable is eventually installed. A cover keeps the drum and cable ends clean during storage, reducing preparation time when the cable is needed.

What to Look for in a Cable Reel Cover


Quality Material


Industrial cable reel covers need heavier material than typical garden covers. The standard for most cable drum applications is 18oz PVC coated vinyl — heavy, fully waterproof, and durable enough for the rough handling that is common on construction sites and in cable yards. 600D PVC-coated polyester is an alternative for lighter drums or indoor storage environments where the main risk is dust and light moisture rather than sustained rain and site conditions.

Perfect Fit as Per Your Need


Cable drums come in a wide range of standard sizes — from small 400mm diameter reels used for coaxial or data cable up to large 2,500mm diameter drums used for high-voltage power cable. Within each diameter, the drum width (flange-to-flange distance) also varies. A cover that is made to the specific diameter and width of your drum sits properly on the flanges, closes cleanly at the edges, and does not shift or lift in wind.
Standard off-the-shelf cable reel covers are typically sized to a range of drum diameters and rarely fit any single drum well. A custom cover made to your drum’s exact diameter and width eliminates the gaps that allow rain and debris in.

Fastenings


A cable reel cover needs to stay on a drum that may be outdoors for weeks or months between use. The main fastening options:


● Drawstring hem: pulls tight around the drum flange edge and holds in most conditions
● Ratchet strap loops: eyelets or loops allow a ratchet strap to be passed under the drum and over the cover, securing it even in exposed outdoor conditions
● Velcro closure panels: useful for covers that need to be opened and closed regularly without fully removing the cover

Custom Sizes — Why They Matter for Cable Drums


Cable drums are not made to a universal standard. A 1,000mm drum from one manufacturer is not the same external dimension as a 1,000mm drum from another. The flange diameter, core diameter, and flange-to-flange width all vary. A cover made to your specific drum dimensions fits properly rather than being a loose sheet draped over the top.


Curtains & Covers UK makes cable reel covers to your exact drum measurements. Measure the flange diameter (the outer diameter of the drum at the flanges), the drum width (flange to flange), and specify whether the cover needs to close over the flanges on both sides or sit on top of the drum only. The cover is made to those dimensions.

How to Measure Your Cable Drum for a Cover


● Flange diameter: measure across the full outer diameter of the drum flange — the widest circular disc on each side of the drum
● Drum width (traverse): measure the distance between the outer faces of the two flanges
● Core diameter: measure the inner diameter of the drum barrel — useful if the cover needs to fit over a rotating axle or storage shaft

For a cover that wraps the full drum including both flanges, use the flange diameter and the traverse width. For a cover that fits over just the cable-wound section, use the full wound diameter (flange diameter plus cable overhang if any) and the traverse width.

Frequently Asked Questions

Q: Can cable reel covers be used on drums that are still being wound or unwound?


A: A full enclosure cover is designed for storage rather than active use — it needs to be removed before winding or unwinding. Some operators use a partial cover or a cable end cap to protect the exposed cable end during active use, leaving the drum itself uncovered. For storage between uses, a full cover is the right approach. If you need protection during active winding, contact us and we can advise on the options.


Q: Do cable reel covers work for very large drums — 2,000mm or bigger?


A: Yes. Custom covers can be made for any drum diameter. Very large drums — 1,500mm to 2,500mm and above — are one of the best use cases for a custom cover because no standard off-the-shelf size comes close to fitting properly. Measure the flange diameter and traverse width and send those dimensions. There is no size limit.


Q: How long does a cable reel cover last in an outdoor site environment?


A: An 18oz PVC vinyl cover in a typical outdoor site environment should last four to six years with reasonable care. Site environments are hard on covers — rough surfaces, heavy equipment moving nearby, and harsh weather all take a toll. The main things that shorten cover life are dragging the cover across rough ground, leaving it in contact with sharp edges, and storing it folded and damp. With careful handling, the lifespan extends considerably.


Q: Can I get covers for cable reels that need to be identifiable by colour?


A: Yes. Cable reel covers can be made in different colours to assist with identification in a cable yard or on a site with multiple drum types. Standard colours are black and grey, but other options are available on request. Contact us with your colour requirements when ordering.


Q: Do you make covers for other industrial storage reels — hose reels, wire reels, rope drums?


A: Yes. The same cover construction used for cable drums works for hose reels, wire reels, rope drums, and similar circular industrial storage equipment. The cover is made to your drum dimensions regardless of what is wound on it. Send the flange diameter and traverse width for any drum type and we will make a cover to fit.


Q: Do you supply cable reel covers for large orders — multiple covers for a cable yard or distribution depot?


A: Yes. Curtains & Covers UK handles bulk orders for cable yards, utilities contractors, and industrial storage facilities across the UK and Europe. Contact us with your drum dimensions and quantities and we will provide a quote for the full order.

More To Explore

Customer Support

Typically replies within a minute.